Showing all 20 results

The health of a hydraulic system is determined by two parameters – oil temperature and pressure. Consequently, hydraulic system design engineers should install devices in the system that make it safe and simple, for maintenance technicians to check the pressure on a routine schedule.

The test point or pressure test coupling is designed for just such a task. They allow machine operators and maintenance personnel to easily and safely connect analog/digital measuring and display devices for the temporary testing or continuous monitoring of system pressure. This type of connection requires no tools, can be used during machinery operation, and will spill no oil when connected and disconnected. The unit even has the capability to connect under pressure up to 5800 PSI (400 bar).

The pressure testing side of the test point is M16x2. The side that connects into the machinery comes in a variety of connections – NPT, SAE, JIC, Metric, BSPP, BSPT, ORFS, DKO, etc. A benefit of using…

$15.83 – $658.75
View products

澳洲幸运10计划网

Male coupling designed for monitoring and control of pressure. Test point connection is M16x2.0. Advantages of using the Test 20 coupling are system testing at working pressure, leakproof connection before ball check is open, protective cap, and minimizes the introduction of contamination in the hydraulic system.

$61.25 – $134.91
View products

The direct gauge adapter is designed to make the gauge connection to a pressure test coupling safe, effortless, and spill-free. The female swivel end of the direct gauge adapter is a M16x2 connection. Use in conjunction with the M16x2 test connector (Test Point).

$26.49 – $56.75
View products

The M16x2 male pressure test coupling with a 90° M16x2 female swivel can be installed at any point of the hydraulic system where pressures need to be monitored. The system is designed and manufactured according to ISO 15171-2 and is fully interchangeable with any brand of test point or Minimess that uses an M16x2 connection.

Specifications:…

$22.38
Add to cart
Add to Quote

The HSP conversion adapter has been constructed to enable an adaptation between the 5/8″-14 BSF system (HSP & Steck) to the worldwide used M16x2 system. Just screw our adapter onto the HSP & Steck test coupling (test point). The result is a regular M16x2 system connection. Now you can use your hoses and fittings from the M16x2 system.

Specifications:

Material: Steel Surface: Zinc nickel, transparent, CrVI-free Pressure rating: 9000 PSI (630 bar) Temperature rating: -4 to 212˚F (-20 to 100˚C) Media: Hydraulic oils and mineral-based fluids

Compatible with JCB machines.…

$46.75
View products

There may be times when you want to check your hydraulic system’s pressure but the test connector is too close to a moving part, making the task too dangerous. Or perhaps you might want to sit in the operator’s seat of a piece of mobile equipment to monitor the machine’s performance. Either way, the microbore hose assembly is designed to make remote pressure observation safe and convenient.

Measuring approximately 1/4″ (5mm) in diameter and extremely lightweight, microbore hose is available in various lengths for your convenience and connects to any STAUFF® Test 20 (M16x2) test point. A hose union is required to connect a microbore hose assembly to a direct gauge adaptor.

Specifications:…

$35.67 – $59.94
View products

There may be times when you want to check your hydraulic system’s pressure but the test connector is too close to a moving part, making the task too dangerous. Or perhaps you might want to sit in the operator’s seat of a piece of mobile equipment to monitor the machine’s performance. Either way, the microbore hose assembly is designed to make remote pressure observation safe and convenient.

Measuring approximately 1/4″ (5mm) in outside diameter and extremely lightweight, microbore hose is available in various lengths for your convenience and comes equipped with 1/4″ NPT male fittings.

Specifications:…

$40.11 – $61.04
View products

Male coupling designed for monitoring and control of pressure. Test point connection is S12.65×1.5. Advantages to using the Test 12 coupling are system testing at working pressure, leakproof connection before piston valve is open, protective cap, and minimizes the introduction of contamination in the hydraulic system.

Use in conjunction with the direct gauge adapter.

Specifications:…

$23.15 – $23.36
View products

澳洲幸运10龙虎

The direct gauge adaptor is designed to make the gauge connection to a pressure test coupling safe, effortless, and spill-free. The female swivel end of the direct gauge adaptor is an S12.65x1.5 connection. Use in conjunction with the S12.65x1.5 test connector (Test Point).

$27.55
Add to cart
Add to Quote

PD Series diagnostic couplings provide easy connections for mechanical gauges or specialized diagnostic equipment. Typically, PD nipples are permanently mounted in the system at threaded test ports, in rigid tubing, or in hose assemblies. The PD nipple is used in conjunction with the PD Series test coupler. Couplers align to the mating nipples without threading. The fittings are rated up to 6000 PSI (414 Bar) depending on configuration and size. This allows gauges, transducers, and other test equipment to be snapped into place without difficulty. The design makes connecting to a PD Series test coupler, safe, effortless, and spill-free!

Features:…

$1.90 – $48.80
View products

PD Series diagnostic couplings provide easy connections for mechanical gauges or specialized diagnostic equipment. The PD coupler is used in conjunction with the PD Series test nipple. Couplers align to the mating nipples without threading. This allows gauges, pressure transducers, and other test equipment to be snapped into place without difficulty. The design makes connecting to a PD Series test nipple, safe, effortless, and spill-free!

Screw the test coupler directly onto the 1/4″ NPT connection on your pressure gauge or pressure transducer for quick, easy pressure reading from any PD style diagnostic nipple.

Compatible with John Deere, Genie, Caterpillar, and Toro Dingo®.

Features:…

$40.58 – $45.78
View products

The Snap-Check pressure testing system, monitors and diagnoses fluid power systems in a snap. Snap-Check identifies operating pressure surges without the need for a permanently mounted gauge. Applications include mobile equipment, injection molding machines, oil and gas equipment, marine vessels and production machinery.

The Snap-Check test nipples have a maximum working pressure of 8700 PSI (600 bar). This ensures extra long, leak-free service and unsurpassed reliability. The system can also be connected under pressure up to 4350 PSI (300 bar) on the nipple side and is available with UNF, NPT, BSPP, BSPT, and metric threads. Nipples come with red dust caps to keep them clean and prevent dirt from entering your hydraulic system.

Used in conjunction with the Snap-Check test coupler. Compatible with Komatsu®.

Specifications:…

$30.02 – $72.84
View products

澳洲幸运10官方预测

Snap-Check identifies operating pressure surges without the need for a permanently mounted gauge. Applications include mobile equipment, injection molding machines, oil and gas equipment, marine vessels and production machinery.

The Snap-Check test couplers have a maximum working pressure of 8700 PSI (600 bar). This ensures extra long, leak-free service and unsurpassed reliability. The system can also be connected under pressure up to 4350 PSI (300 bar) on the coupling side. Couplers come with red dust caps to keep them clean and prevent dirt from entering your hydraulic system.

Use in conjunction with the Snap-Check test nipple. Compatible with Komatsu®.

Specifications:…

$49.10 – $64.74
View products

Thanks to their advanced design, the diagnostic nipples are reliable components in the System 100 measuring device. They are made of hardened steel. The diagnostic nipples are maintenance free and are designed for temperatures from -40°F to 230°F (-40°C to +110°C). The integrated stop valve seals up to a 90 % vacuum. All mechanical parts in the diagnostic nipple are made of corrosion proof materials. An O-ring is integrated in the thread of the measuring nipple as a seal. Comes equipped with a dust cap.

Use in conjunction with the TEMA System 100 Diagnostic Couplers. Compatible with older Volvo® and some Samsung® machines.

Specifications:…

$28.73 – $95.18
View products

澳洲幸运10官网开奖历开奖结果

Thanks to their advanced design, the diagnostic nipples are reliable components in the System 100 measuring device. They are made of hardened steel. The diagnostic nipples are maintenance free and are designed for temperatures from -40°F to 230°F (-40°C to +110°C). The integrated stop valve seals up to a 90 % vacuum. All mechanical parts in the diagnostic nipple are made of corrosion proof materials. An O-ring is integrated in the thread of the measuring nipple as a seal. Comes equipped with a dust cap.

Use in conjunction with the TEMA System 100 Diagnostic Nipples. Compatible with older Volvo® and some Samsung® machines.

Specifications:…

$84.00 – $106.23
View products

CEJN Series X65 is a Flat-Face quick-connect coupling according to and exceeding the ISO 16028 Standard for low- and medium-pressure hydraulic applications. The Flat-Face design minimizes spillage during connection and disconnection. X65 couplings require only one hand for operation, making the connection and disconnection fast and easy. Dust caps are available as accessories for both the coupling and nipple when disconnected to prevent dust and debris from entering the system. X65 couplings feature manual security locking as added protection against involuntary disconnection.

$34.15 – $82.56
View products